Fault/Remedy - ADE BPM 1600 FitVigo Mode D'emploi

Fault/Remedy

Fault/Remedy
Fault
No function
The blood pressure monitor
apparently shows wrong
measurement results.
Display "E1".
Display "E2".
Display "E3".
SYMBOL
Display "E10" or "E11".
Display "E20".
Display "E21".
Display "Eexx".
+ "Lo" is shown on the
display.
" " is shown on the
display.
Data transmission has failed.
Further information on the FITvigo app can be found online at
www.fitvigo.de
Do you need help or do you have additional questions?
Then please send us an email at: support@fitvigo.de
38
Possible Cause
‚ Is the battery completely charged?
‚ Repeat the measurement in five minutes.
‚ The cuff is loose. Fasten the cuff and repeat
the measurement.
‚ The cuff is too tight. Re-fasten the cuff and
repeat the measurement.
‚ Relax for a moment and repeat
the measurement.
‚ Movements can affect the measurement. Relax
for a moment and repeat the measurement.
‚ Ease your wrist completely and repeat
the measurement.
‚ Apparently wrong measurement. Repeat
the measurement.
‚ A calibration error has occurred. Repeat the
measurement. If the problem persists, please
contact the dealer where you bought the device.
‚ The battery is empty and must be charged; see
"Charging the Battery".
Bluetooth®
‚ Has
smartphone?
‚ Is the FITvigo app active?
‚ Was the distance between the blood pressure
monitor and smartphone too large?
Max. distance: 10 m.
been activated on your
Blood pressure monitor/Wrist BPM 1600