Measuring Blood Pressure - ADE BPM 1600 FitVigo Mode D'emploi

Connect the device to the app (pairing)
Bluetooth®
1. Activate
2. Start the app and follow the instructions. Pay attention to the information and
explanations displayed.
The blood pressure monitor will be connected to the FITvigo app after a short while.

Measuring Blood Pressure

Before you measure
In order to obtain meaningful values and as correct measurement results as possible,
please note the following:
‚ Measure your blood pressure several times a day, preferably at the same time.
‚ Always carry out the measurements under the same conditions, and always use
the same arm, in order to get comparable results.
‚ Measure in a relaxed condition and try to relax 5 minutes before measuring.
‚ Avoid physical work approximately one hour before measuring.
‚ Do not smoke or drink alcohol before measuring your blood pressure.
‚ Measure your blood pressure at normal body temperature.
‚ If the result of a measurement deviates greatly from the usual measurement
results, carry out another measurement. However, in any case wait approximately
five minutes before repeating the measurement.
‚ Do not inflate the cuff on the same arm where another medical measurement
device has already been placed as this may result in temporary malfunction of
this device.
‚ Please also refer to the section "General Information on Blood Pressure".
Blood pressure monitor/Wrist BPM 1600
on your smartphone.
Measuring Blood Pressure
31