Start-Up; Charging The Battery; Set Time And Date - ADE BPM 1600 FitVigo Mode D'emploi

Start-up

Start-up

Charging the battery

Set time and date

1. Press and hold the
2. Set the current hour-time using the
12-hour system: The afternoon hours are displayed with "PM".
3. Press the /SET button to store the set hour-time.
4. Proceed as described in order to set the following values in succession: Hours >
Minutes > Month > Day > Year.
5. Finally, press
As soon as "done" appears on the display, the process is complete.
The device switches off after approx. 60 seconds. Please leave it switched off.
Install app
1. Make sure your smartphone is connected to the internet.
2. Download the "FITvigo" app in the Apple App Store (iOS) or Google Play
Store (Android).
‚ Depending on the settings of your smartphone, additional costs may
be incurred for the internet connection or data transfer.
‚ We recommend downloading over a wireless network.
‚ You can also use the blood pressure monitor with all functions
without the app.
30
/SET button until the hour indicator flashes on the display.
/SET.
1. To enable the display, briefly press and
hold the two grey MEM and SET buttons.
2. Connect the supplied USB cable to the
USB connector of the blood pressure
monitor and to the USB port of a
computer (PC, tablet, notebook) or a USB
charging device.
Observe the contacts of the USB connector
and the charging icon on the display.
Do not use the device while it is charging.
As soon as the battery icon on the display no
longer flashes, the battery is fully charged
and the blood pressure monitor is ready
for use.
/MEM button. The time is set using the
Blood pressure monitor/Wrist BPM 1600