ASCOM Ascotel Office 100 Mode D'emploi page 169

Programming your telephone
Storing functions under the Hotkey
Same procedure as under Number/Name until it comes time to select the memory
Hk1...Hk6. From that option:
¥
¥
1 2
4 5
7 8
0
Notes
• The corresponding function codes are entered in the two memory locations
automatically and can be added to/amended as required.
• If you do not enter a name when storing, a short default name will be used, e.g.
"DND" for "Do not disturb".
• The symbol " " in the symbol line and a "|" next to the function indicate that a
programmed function is active.
• The program jumps directly to the Hotkey Programming when you "Long click" the
Hotkey.
20BA265311/B0
Ok
Press Foxkey under "¥" to call the menu
"Fn: Funct." (Function) and confirm by pressing
"Ok".
Ok
Press the Foxkey under "¥" repeatedly until the
desired function is displayed and confirm with
"Ok".
The contents of memory 1 for this function are
Ok
displayed (activate function).
Press Foxkey under "Ok" to store the function in
memory.
Ok
If desired, enter a name and acknowledge with
3
6
"Ok". The contents of memory 2 are displayed
9
(deactivate function).
Ok
The function is stored in memory using "Ok".
31