Mechanical characteristics
Dimensions (w/o antennas)
Weight
Enclosure
Extended operating
temperatures
Environmental specifications
Status indicators
Push button
Software
Device configuration
Firmware upgrade
SNMP
Operating mode
AP mode only
Network topology
Security
Client/Bridge mode only
Network topology
Security
L x l x h = 186 x 120 x 57 mm
/N, /NP : 740g - /NI, /NPI : 800g
IP 66, cast aluminum housing
-25°C to + 70°C / -13°F to 158°F
(-40°C to +80°C / -40°F to 176°F for
models /N and /NP with WLg-RF400mW
high power option)
Support Railway, automotive
specifications
9 LEDs: Power1, Power2,
LAN1 10/100, LAN1 ACT, LAN2 10/100,
LAN2 ACT, WLAN Tx/Rx, DIAG, C-Key
Short push: Reset
Long push (> 2 sec.) : Restore factory
settings
Automatic device discovery
Built in web based utility for easy
configuration from any web browser
(username/password protection)
Yes (via web browser or NDM)
SNMP V1, V2C
AP (Access Point)/ Repeater or
Bridge/Client
infrastructure mode with or without WDS
WEP, WPA-PSK/WPA2-PSK, WPA/
WPA2 with 802.1x authenticator, MAC
address filter, SSID visibility status.
Only WEP is available if WDS enabled
infrastructure mode
ad-hoc mode
WEP, WPA-PSK, WPA2-PSK. 802.1x
supplicant. AES/TKIP/WEP by hardware
encryption
-8-