Princess 01.350000.01.001 Mode D'emploi page 4

Instruction manual
• Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50Hz).
Assembly instructions
• Remove the 3 screws out of the turnplate (Picture 1).
• Pull the power cord through the hole of the base (Picture 2).
• Align the base with the turnplate and use the 3 screws to secure
them together (Picture 3).
• Press the power cord into the line deduction.(Picture 4).
4
USE
USING BUTTONS ON FAN
• Press the on/off button to turn on the device.
• Press the speed button to choose the desired speed setting.
Press repeatedly to select one of the three different speed
settings.
• Mode button: Choose from 3 different breeze patterns: Normal,
Natural and Sleep. The natural and sleep function are shown on
the display when they are selected.
• Press the oscillation button to turn on the swing function, press
again to turn off.
• Press the timer button to activate the timer. Push repeatedly to
increase the timer. The timer can be set from 1 to 8 hours.
• Press the on/off button again to turn off the fan.
USING THE FAN WITH CLIMATE APP
• The fan can be used manually with its built-in controls or you can
use a smart phone to control it. Before you begin, ensure the
Homewizard Climate app is downloaded. The Homewizard
Climate app is available on Android and iOS.
Pair your fan to HomeWizard Climate app
• Make sure your fan is powered.
• Open HomeWizard Climate APP.
• Create an account or if you already have a HomeWizard account,
please log in using those details.
• Click "Add new Climate Device" to add a new device.
• Follow the instructions on the app to connect the fan.