Important - Kerbl ProtectoSoft Mode D'emploi

EN
ProtectoSoft Back Protection Vest
This vest can protect the spine in the event of a fall. The soft padding made from high shock absorbing material acts like
armour while still providing a high range of movement. ProtectoSoft has been made from the best materials and its weight
has been reduced thanks to the lasted technology.
This product has been manufactured in accordance with strict quality criteria as defined in European Standard
EN 1621-1:2014!

Important!

Carefully read the following safety information before use.
The degree of protection has been confirmed at "Level 2", with impact protection corresponding to a force of > 9000 N.
Important: The protection vest cannot prevent spinal injuries; however, the scale of the injury can be reduced significantly
by wearing it. Do not expose this product to extreme temperatures (over +50 °C and/or under -10 °C) because this can have
negative effects on its protective capability (deformations).
Our back protectors do not offer protection for the spine or any protection against severe torsional movements, flexion,
extension or compaction of the body.
Make sure that the back protection is worn properly. It should not be worn too tight or too loose on the body (with the
danger of it slipping).
The foam inside the vest is sensitive to extreme temperatures. At low temperatures it can become brittle and at high
temperatures the protective effect can be impaired.
If there are any signs of deterioration in the foam, the protector must be replaced. Signs of deterioration may include areas in
which the foam has become thinner, compressed or extremely loose. Check the vest regularly for such signs. Never attempt to
repair the back protector.
We strongly recommend wearing a helmet for additional protection.
Important: You should not continue to use the protector after it has been involved in a fall. This can cause hairline
cracks to form, which can lead to a dangerous decrease in its performance. The protector should be checked on a
regular basis for damage and/or deformations.
In order for the product to provide optimal protection, you should only use it in accordance with the instructions and you
should never make modifications to it. Any change to the product can reduce its effectiveness and severe injuries may be
the result.
How to use
Select your size according to the following size table. If the back protector seems too loose after closing the zip fastener and
abdominal belt, select the next smallest size. The fit is optimal when you feel comfortable and the product is not too tight or
too loose.