Opale-Paramodels JUMPBOX Manuel D'utilisation page 9

Dropping system assembly
Kit content:
- 1 x G10 plates kit
- 1 x 10kg.cm servomotor
- 1 x Pod
- 1 x Elastic
- 1 x hardware kit
- 1 x stainless still pin
Assemble the side plates as shown on the
picture.
Place the main plate.
Secure the main plate with 4 x M3x8 CHC
screws, 4 x small M3 washers and 4 x M3 nuts.
Hold the servomotor with the small plate
and 4 x M3x30 CHC screws and 4 x M3 nuts.
O pal e - Pa ramo del s. co m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
9
contact@opale-paramodels.com +33(0)981 144 387