Installation; Built-In Installation Of Single Appliance; Built-In Installation Of Two Or More Appliances - Bertazzoni REF18WCPIXL Notice D'installation

6. INSTALLATION

IMPORTANT: The following instruction for installation apply to all Bertazzoni models.
6.1 Built-in installation of
single appliance
For a built-in installation, to cover gaps between
the appliance and the adjacent cabinets, special
side profiles and covering frames are already
factory installed.
Operate as follows:
> Push the appliance into the installation cutout [ 1 ].
1
> Always mount front panel on door before push-
ing the unit into its final position inside the cutout
or structure.
> Check the levelling of the appliance, adjusting
its feet and wheels to correct it.
> Secure the appliance to the adjacent cabinets by
fixing to these the side profiles factory-installed
on the appliance [ 2 ].
To make this operation easier keep the door open.
2
> Mount the profiles the trim covers: first insert
them laterally and then push firmly until a "click"
is heard [ 3 ].
18
3
Side profiles mounting:
Appliance
B
Wall or furniture
A plastic connecting brackets
B Profile trim cover
6.2 Built-in installation of two or
more appliances
> The central profile is provide with freezer and
wine cellar columns.
Special side profiles and plastic covering
frames are provided for closing gaps be-
tween the appliance and the adjacent cabi-
nets.
Operate as follows:
> Position the appliances in front of the installation
area, leaving enugh space to operate at their back
[ 1 ].
1
A
B