Safety; Intended Use; Prohibited Use; Security Instructions - HOLZMANN MASCHINEN BS 210TOP Mode D'emploi

11

SAFETY

11.1

Intended Use

The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
To cut metal, cast iron and plastic materials
Any manipulation of the machine or its parts is a misuse, in this case
MASCHINEN and its sales partners cannot be made liable for ANY direct or indirect
damage.






11.2

Prohibited use

 The operation of the machine outside the stated technical limits described in this
manual is forbidden.
 The machine shall not be operated in areas exposed to increased fire or explosion
hazard.
 The use of the machine not being suitable for the use of the machine and not being
certified is forbidden.
 The use of the machine not according with the required dimensions is forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in this user-manual is
forbidden.
 The unattended operation on the machine during the working process is forbidden
 It is not allowed to leave the immediate work area during the work is being
performed!
11.3

Security instructions

Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator
and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
HOLZMANN MASCHINEN GmbH
Use only blades allowable for this machine
Never use damaged blades!
Never use the machine with defective or without mounted guards
The removal or modification of the safety components may result in
damage to equipment and serious injury!
The workpiece must be always clamped in the machine vice during cutting
To remove sawdust and chippings from the machine when running is
strictly prohibited!
HIGHEST RISK OF INJURY!
www.holzmann-maschinen.at
WARNING
SAFETY
HOLZMANN-
23
BS 210TOP / BS 275TOP