Accessories - GBC AccuCut A300 Manuel D'utilisation

Cutting Mat Replacement
D. Cutting mat has four cutting positions (2 each side). When
blade does not cut cleanly, either rotate or flip mat over to new
cutting surface. When mat has been worn on all four cutting
surfaces, replace it.
Cutting Blade Replacement
CAUTION: Sharp blade
A300 / A400pro
E. Carefully pry open the blade cover from both sides of
1
the handle assembly (A300/A400pro).
2 Remove the screw and take off blade holder assembly.
F. Insert the replacement blade holder assembly and line
3
up with the notch at the top (A300/A400pro).
Tighten the screw.
4
Replace blade cover and make sure it snaps shut.
5
Only use the accessories that are approved by the
6
manufacturer.

Accessories

Cutting mats:
Blades:
Refer to your local reseller for availability.
Guarantee
Operation of this machine is guaranteed for one year from
date of purchase, subject to normal use. Within the guarantee
period, GBC will at its own discretion either repair or replace
the defective machine free of charge. Defects due to misuse
or use for inappropriate purposes are not covered under the
guarantee. Proof of date of purchase will be required. Repairs
2 Cutting mats, Part number 9212CME (A300/A400pro/A425pro)
2 Cutting mats, Part number 1756605 (A445pro)
2 Straight blades, Part number 9212RBE (A300/A400pro)
1 Wave blades, Part number 9212WBE (A300/A400pro)
2 Perforated blades, Part number 9212PBE (A300/A400pro)
1 Multiblade disk, Part number 1756604 (A425pro/A445pro)
Service
Do not attempt to service or repair the unit yourself. If your
trimmer is under warranty return it to the point of purchase
for replacement or repair. If your trimmer is no longer under
the point of purchase return period and requires replacement
or repair, please contact your supplier for further assistance.
A425pro / A445pro
G. To remove the rotary blade housing cap, loosen and
1
remove the screws on right hand side.
Remove rotary blade assembly; remove center screw and
2
separate multi blade from housing.
3 Re-assemble in reverse order.
or alterations made by persons not authorised by GBC will
invalidate the guarantee. It is our aim to ensure that our
products perform to the specifications stated. This guarantee
does not affect the legal rights which consumers have under
applicable national legislation governing the sale of goods.
Cutting Blade Storage
(A400pro)
The Accucut A400pro
incorporates a storage
compartment for spare
and special blades.
To open this compartment,
simply depress the door latch
and swing open.
5