Sony MPF88E-UA Mode D'emploi page 7

2
Make sure the panel center
notches are aligned with the
drive center hooks, then lower
the panel towards the rear of
the drive. When the panel
snaps into place, it is secured.
Note
Make sure the panel snaps into place. If it
doesn't, you may no longer be able to
remove the panel.
Align the panel center
notches with the drive hooks.
To remove the colour panel
1
Hold the drive as illustrated, put
a fingernail in one of the
grooves at the rear of the drive,
and then release one of the
drive hooks. Repeat the same
steps for the other hook.
Put your fingernail in
the notch.
Rear of drive
2
Release the center drive hooks,
then gently slide the panel
away from the drive.
Gently slide
the panel and
remove it.
Release the
center hooks.
GB
7