Connection Diagram Solano Easy Pro N/W - CAIROX SOLANO EASY PRO-W-100 Manuel D'utilisation

5. Check the power connection before connecting the air curtain.
6. Starting the device without connecting the grounding wire is not allowed.
7. Protect the power cord against pulling out by clamping the PG16 or PG11 cable
gland
8. Tighten all connection cables in the block properly
9. In the event of a hazard due to unintentional reset of the thermal switch, this
curtain (EASY PRO E) should not be powered by an external connecting device
such as a time switch, or connected to a circuit that is regularly switched off and
switched on during use.
10. Do not start the device with the service hatch open.

11 CONNECTION DIAGRAM SOLANO EASY PRO N/W

❶ Power supply: 1N  230V/50Hz (min. 3x1,5mm
❷ Valve with actuator S-V-3-½; S-V-2-½ (min. 3x0,75mm
❸ Door switch S-DS-RMAG/S-DS-MEC (door opened – closed switch)(min.
2
2x0,5mm )
❹ Air curtain step switch witch thermostat S-C (min. 5x0,5mm
15/52 User Instructions
PIC. 11.1 Power supply 1N~230V / 50 Hz + S-C
2
; Protection B4)
CAIROX
2
)
2
)
15/12/2021