Operating instructions
EN
THANK YOU FOR YOUR CONFIDENCE!
In order to be able to constantly guarantee the product's optimum functionality and readiness
for operation as well as your safety, we have a request: Please thoroughly read this operating
instruction prior to the first use and observe all safety instructions! The operating instruction
is a component of this product. Keep this, so you can always refer to it.
1.
DELIVERY SCOPE
►
►
1 control device
►
►
1 operating instruction
2.
SAFETY INSTRUCTIONS
2.1 General
•►
Before you start mounting the device please read the operating instructions carefully.
•►
The installation shall be performed by qualified personnel.
•►
Packaging material is not a children´s toy. Keep it away from children!
•►
Do not open the device. It does not contain parts you have to maintain.
2.2 Ambient conditions
The standards used to assess the product specify limit values for use in the living area,
business area and in small enterprises; the product has been intended for use in the following
operating environments:
•►
Residential buildings/living areas such as houses, flats, rooms, etc. selling areas such as
shops, wholesale markets, etc.
•►
Premises of small enterprises such as workshops, service centers, etc.
•►
All areas of application characterize themselves by a connection to the public low voltage
mains.
3.
APPROPRIATE USE
The SHT 5002 water detector is designed for level control (2-point controller). An upper and
lower level are defined by two water sensors or a float switch and can be used to automati-
cally fill or empty a container.
The SHT 5002 water detector also has another sensor input for a water detector with a
potential-free relay contact. This makes it possible to determine the water level independent
from the current level control.
Examples of use:
►
►
Overflow warning in the event of pump failure
►
Dry running warning to protect the pump
►
►
►
Water level report
11