Attaching The Blade; Connecting The Charger/Charging The Li-Ion Battery - Aesculap Suhl FAV5 CL Mode D'emploi

Aesculap Suhl GmbH
Battery-powered clipping machine FAV5 CL

4.1.2 Attaching the blade

Risk of injury caused by sharp cut-
ting plates!
Handle the blade of clipping
machine FAV5 with appropriate
WARNING
caution.
Note
The blade GT330 #10 (USA+UK) for battery-powered
clipping machine FAV5 CL is included in the scope of
delivery. Various blades are available for different
applications!
13
Fig. 1
If the knife hinge is closed: Open knife hinge 13
with a screwdriver, see Fig. 1.
12
Fig. 2
6
13
Install blade 12 on open knife hinge 13, see Fig. 2.
Press ON/OFF switch 11.
Press blade 12 gently in the direction of the clip-
ping machine FAV5, see Fig. 2.
The blade 12 engages with an audible click.
Ensure that the blade 12 is fitted correctly on the
clipping machine FAV5 CL.
4.1.3 Connecting the charger/Charging the
Li-ion battery
Fire hazard due to battery poles
shorted by fluids or metal compo-
nents!
Do not short the Li-ion battery.
WARNING
Risk of injury and material damage
due to damaged Li-ion batteries!
Prior to charging, check the Li-
WARNING ion batteries for any damage.
Do not use or charge damaged
Li-ion batteries.
Loss of capacity/performance due
to prolonged storage of discharged
Li-ion batteries!
Store Li-ion batteries only in
CAUTION
fully charged condition and
recharge stored batteries once
every month.
Destruction of the product, charg-
ing bay or Li-ion battery when
inserting the wrong type of battery
in the charging bay!
CAUTION
Insert Li-ion batteries only in
the appropriate charging bay.
Insert the Li-ion battery in the
correct position.