Cleaning And Maintenance - Domo DO8123 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
www.domo-elektro.be
continue to operate on the lowest speed I. So if you have selected speed III, for
example, the fan will start at speed III. After half an hour it will switch to speed
II. After another half hour it will switch to speed I. It will continue to operate at
speed I now.
TIMER: you can set the timer from 0,5 hour upto 7,5 hours with the TIMER button.
The set time is indicated on the LED display. It is the sum of the time indications next
to which the red dot is lit. So:
1/2H
1H
2H
4H
time
0,5
1
The fan will automatically switch off when the set time has passed.
OSC: with this button you can switch the oscillation function on and off. When it is
switched on, it will alternately turn to left and right to better spread the air.

CLEANING AND MAINTENANCE

Maintenance of this appliance may only be carried out by a qualified service or
person.
If it is necessary to clean the outside of the appliance, then make sure that the
appliance is switched off and unplugged. Use a soft cloth to clean the outside of
the appliance. To remove persistent dirt or stains, you can dampen the cloth a bit
with warm soapy water.
Do not use any solvents, like thinners, as they may damage the appliance.
1,5
2
2,5
3
3,5
4
4,5
5
37
DO8123
5,5
6
6,5
7
7,5

Publicité

Table des Matières
loading

Table des Matières