Ordering Replacement Parts; Disposal And Recycling - Ergo tools Pattfield E-EBH 750 Mode D'emploi D'origine

Anleitung_E_EBH_750_SPK7:_
Use a 5 mm Allen key to open the oil drainage
screw and let the oil drain off into a container.
Refill the equipment with new and high-grade
motor lubricating oil.
Screw the oil drainage screw back in place.
Transport
Important. Switch off the motor before transporting
the equipment. If you pull the electric hoe over hard
ground, the blades and the equipment may be
damaged even with the motor switched off. Make sure
that the equipment does not come into contact with
such a surface.

8.4 Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

9. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
28.10.2010 11:05 Uhr Seite 15
GB
15