Operating Principles And Procedures - Agu Froggy Mode D'emploi

ATTENTION
For correct measurement of the temperature during the preparation of
bathing water, the water must be thoroughly mixed.
*The results of the water temperature measurement are updated and dis-
played on the thermometer for Bath AGU TB4 every 30 seconds.
9

OPERATING PRINCIPLES AND PROCEDURES

ATTENTION
The results of the first measurement will appear in 30 seconds after turn-
ing on the device.
Note: the unit of measurement (degrees Celsius or Fahrenheit) can be
changed within the first 5 seconds after the thermometer is turned on by
pressing and holding the ON/OFF button for 2 seconds.
1. Put the device into the water.
2. Press and release the ON/OFF button. The display will show
symbol
3. After 30 seconds, the display will show the numerical value of the water
temperature. The indicator updates every 30 seconds, as evidenced by a
flashing color display.
4. Turn off the device after taking a measurement or the device will turn off
automatically. To extend the battery life, it is better to turn off the device
manually by pressing the ON/OFF button after it has been used.
EN
, confirming that the device is working correctly.
and the
43