The Menu; Anavigation In The Menu; B "Configuration" Submenu - ASTON Global WAMBA HD Manuel D'utilisation

PRINCIPLES OF NAVIGATION OF YOUR RECEIVER
The reorganization of lists
You can reorganize a list by pressing on the
FCT
channels, bouquets, radios and Favourites. In reorganization mode, the
move a channel in the list, without zapping.
Select the function "Reorganise the list" by pressing OK. You will then go back to your list.
In the list, select the channel you want to move using the
Choose the new position for the channel using the
can also enter the number of the channel that you wish to change to.
By pressing the FCT button, you can switch back to zapping mode, among other options. You can equally
hit BACK to exit the mode.
34
All manuals and user guides at all-guides.com
button on your remote control when you are on the list of
button enables you to select and
OK
OK button.
or Pg buttons and confirm by pressing OK. You
π † π †
5

THE MENU

NAVIGATION IN THE MENU
A
Press the blue button to access the Menu.
This menu comprises 5 submenus, each divided into sections.
You can navigate in the submenus by using the
Choose the sections using the buttons.
è
To access a section, press OK.
To move within a section, use the buttons on your remote control.
π †
To change your parameters, use the buttons on your remote control and/or the alphanumeric
è
keypad and confirm by pressing OK.
In the menu, the submenus and the sections, the
"CONFIGURATION" SUBMENU
B
This is divided into 4 sections: "System", "Audiovisuals", "Antennas", and "Network".
"System" section
This section enables you to select the date, time and time zone, and also languages, latitude and longitude.
You can perform a on your equipment by pressing the
RESET
you have programed, and all channels installed, will then be lost.
"Audiovisuals" section
This section enables you to configure your WAMBA
installation (television set, audio output, video output, television format, HD format, auxiliary output, etc.).
"Antennas" section
This section enables you to modify the configuration of your satellite dish (LNB type, name of satellite, fre-
quency, east limit, west limit, etc.). It is divided into two, according to your type of installation: fixed mount
and motorised mount.
"Network" section
This section enables you to configure your WAMBA ®
work.
Warning: any incorrect handling may cause a malfunction in the WAMBA
users only.
button on your remote control.
π †
button will bring up help.
FCT
button. Warning: all the parameters
green
® HD according to the specifications of your audiovisual
HD according to the specifications of your personal net-
® HD. This part is for advanced
35