Tyco Security Products American Dynamics i625PTZ Guide De Référence Rapide page 14

English i625PTZ Recessed Indoor Flush Mount Housing Quick Reference Guide
5 Secure the housing to the ceiling.
a Insert housing in the ceiling cutout. Reference Figure 4.
b Angle the housing as necessary to ease insertion into the cutout. Ensure that the
orientation of the housing is correct with reference to the conduit adapter.
c When in place, turn the two locking screws clockwise to seat the "swing out"
mounting clips tightly against the ceiling to secure as seen in Figure 5.
6 Remove the camera mounting spider from the housing.
The safety lanyard will keep the camera mounting spider attached to the housing and
should not be removed.
a Rotate the camera mounting spider anti-clockwise to release it from the screws on
the housing flange.
4
Figure 4
Figure 5
i625PTZ Indoor Recessed Housing