TAKARA BD10 Mode D'emploi page 43

2. Insert the ESB flash drive to the ESB jack of the rear panel.
3. In the SETUP menu, select [General Setting] >[System] > [Upgrade] > [ESB Storage].
4. Follow the instructions on the TV screen to confirm the update operation.
5. Once the software update is complete, this product automatically switches into standby
mode.
6. Disconnect the power cord for a few seconds; reconnect an turn on this player.
CLEAN DISCS
Wipe the disc with a Micro Fibre Cleaning Cloth from the centre to the edge in a straight
line movement.
Note
To prevent possible damage of this product do not turn off the power or remove the ESB
flash drive while the software update is in progress.
Caution
Never use solvents such as benzene, thinner, cleaners available commercially, or
anti-static sprays intended for discs to clean the player.
19