Information And Malfunction Signals On The Display - Fulgor Milano F7PBW24S1-R Mode D'emploi

As needed, you can reset the temperatures as
follows:
> Freezer compartment: from -13° C to -23° C
(from 9° F to -11° F), the default temperature,
which is recommended, is -18° (0° F)
> Refrigerator compartment: from +1° C to +7°
C (from 34° F to 46° F), the default temperature,
which is recommended, is +5° C (41° F).
> Fresh compartment: from -2° C to +2° C (from
28° F to 36° F), the default temperature, which is
recommended, is 0° C (32° F).
Warning
If the "keypad locked" message appear, si-
multaneously press the keys Menu
Up/Down (Down) for 3 seconds.
Note
The displayed temperature may vary
slightly with respect to the set tempera-
ture if the doors are continuously opened
or insertion of room temperature food or
large quantities of food.
It takes 6 to 12 hours to reach the select-
ed temperature.
4.3 Information and malfunction
signals on the display
An integrated control system provides informa-
tion through luminous signals or text messages
shown on the display.
The information signal is always displayed with a
fixed text message, while a malfunction signal is
shown with blinking text.
The acoustic signal that accompanies some mal-
function signals can be deactivated by pressing
the Alarm key on the main control panel.
The list of malfunction signals is located in the
back of this manual.
and
EN
11