Normal Mode - CDVI GALEOR Manuel D'installation

INSTALLATION MANUAL
GALEOR
Illuminated RF Keypad
8] FACTORY RECOVERY
To avoid any damage action ( intentional or not ) the factory recovery can be carried out only by the owner
of the 5-digit Master code or knowing any User code memorized ( with 4 or 5 digits) .
According to that and the fi nal purpose of the recovery, follow the procedure "A+1" or "B+3".
NOTE : At the end of procedure "B+3", even the user code typed within the procedure will be deleted and
the keypad must be memorized again onto the corresponding receiver.
6
cdvigroup.com
FACTORY RECOVER
Master code reset
to factory value
12345
A+1
SIMULTANEOUSLY
FOR 30 SECONDS
2 beeps
Within 20 sec.
type the digits of a
memorized code
3 beeps = OK
Doesn't affect Deletes all User codes memorized
the user codes
memorized
resets the Master code to 12345.

Normal mode

Recover to
factory settings
B+3
SIMULTANEOUSLY
FOR 30 SECONDS
2 beeps
Within 20 sec.
type the digits of a
memorized code
4 beeps = OK
on the keypad, recovers the
choice to 4 or 5 digits, deletes
the link with the receiver and
EN