General Information - CDVI GALEOR Manuel D'installation

INSTALLATION MANUAL
GALEOR
Illuminated RF Keypad
Thank you for buying our products and for the confi dence you placed
in our company.

1] GENERAL INFORMATION

Wireless RF keypad.
Polished heavy duty Zamak
Backlit keys.
Frequency : 433,92 Mhz.
2 channels (buttons «A» and «B»).
Compatible with Erone
Compact.
Surface mount
Mounting with Torx
Partially sealed with epoxy.
22 User codes - 4 or 5 digits.
1 Master code - 5 digits.
Audible and visual feedback.
Modulation: AM/ASK.
Encoding: Keeloq
®
Dimensions (L x W x D):
GALEOR = 110 x 75 x 15mm,
Supply: Lithium battery 3,6V - LS14500
(Supplied).
Current consumption:
- 28 mA in transmission,
- 0,8uA in sleep-mode.
Environmental tests:
vibrations
WEEE
Environmental test:
Salt spray
2] NOTES & RECOMMENDATIONS
Mounting recommendations
Mount the keypad on a fl at surface to avoid
any vandalism and to insure the best mounting.
Security advice
For security advice reasons, change
the factory default master code.
When selecting a master code and user code avoid
sequencial codes (example : 3 4 5 6 7).
2
cdvigroup.com
cast alloy.
®
receivers.
®
.
screws
®
hopping code
IP64
Certifi cation CE
-25°C a +70°C
Certifi cation FCC CFR 47
part 15 compliance*
*
FCC ID : PWN1002000029
The device complies with part 15 of the FCC Rules.
Operation is subjected to the following 2 conditions:
Firstly, this device may not cause harmful interference and,
secondly, this device must accept any interference received,
including interference that may cause undesired operation.
RF exposure warning
This EUT** is in compliance with MPE*** in accordance
with procedures specifi ed in FCC 47 CFR § 1.1310
and 2.1091.
To satisfy FCC RF exposure requirements, a separation
distance of minimum 20cm must be maintained between
this device and users during operation.
The antenna used for this transmitter must not be co-
located in conjunction with any other antenna
or transmitter.
** EUT "Equipment Under Test"
*** MPE "Maximum Permissible Emission"
EN
77