SLV COLOR CONTROL SYSTEM Instructions D'utilisation page 5

ENGLISH – System Manual
General Notes
The COLOR CONTROL System provides a simple control of static colored light in three different zones
and is based on the Master – Slave principle. This principle describes a main unit (Master) sending a
control signal to one or more extension units (Slaves). This enables the implementation of a variety of
equally lighted lighting products within one zone. After connecting all components, lighting items and
establishing the zones the color light or the color changing programs are adjusted by applying one of the
possible operating units (such as remote control, wall panel or the iOS or Android COLOR CONTROL app.
The color changing programs always run in all zones and cannot be assigned to an individual zone.
System Components
COLOR CONTROL Wall Panel
470670
(Master)
COLOR CONTROL Master
470671
Controller
470672 COLOR CONTROL Slave Controller
COLOR CONTROL COLO Slave
470673
Bulb
470674 COLOR CONTROL Signal Repeater
COLOR CONTROL Bluetooth
470675
Adapter
COLOR CONTROL COLO Master
470676
Bulb
470677 COLOR CONTROL Fernbedienung
LIPSY 36 M COLOR CONTROL
133749
Master
Adjustment of light by touch operation. Sends control
signals to slave units. Can be controlled by a mobile
device (iOS or Android) with installed COLOR
CONTROL App when the Bluetooth module is inserted
into the wall panel. Direct connection of lighting
products not possible. At least one slave unit is
needed.
Sends control signals to slave units. Direct connection
of lighting products possible. Includes a remote
control for adjusting the light.
Receives control signals from a master unit. Direct
connection of lighting products possible.
RGBW bulb with E27 socket. Receives control signals
from a master unit.
Allows greater distances (up to 30 m at open areas)
than the regular connection between master and
slave units (15 m max.)
To insert into the COLOR CONTROL wall panel. Allows
to operate the wall panel by a mobile device (iOS or
Android) with installed COLOR CONTROL App.
RGBW Bulb mit E27 socket. Sends control signals to
slave units. Includes a remote control for adjusting the
light.
The Remote control that is included with the COLOR
CONTROL Master Controller, Master bulb and LIPSY
masters as single unit.
RGBW ceiling luminaire with a diameter of 35 cm as
master unit, including a remote control.
LIPSY 50 M COLOR CONTROL
133759
Master
LIPSY 36 M COLOR CONTROL
133748
Slave
LIPSY 50 M COLOR CONTROL
133758
Slave
Principles of zoning
The system allows the controlling of colored and white light in three different zones. The zones describe
the assignment of the installed slave units to the master unit may not be necessarily territorial. Lighting
items of one zone may be in different rooms or there may be several zones in one room. The zones are
designated as zone 1, zone 2 and zone 3. There may be an infinite number of slave units in one zone.
The master unit is always automatically located in zone 1, regardless of the type of the COLOR CONTROL
master unit.
Following an example to show the variety of possible combinations:
ZONE 1
W
COLOR CONTROL
Master Controller
M O D E S P E E D A L L
Z O N E
1 2 3
Z O N E Z O N E Z O N E
W H I T E WH I T E 470671
O N L Y O F F
+
Master
RGBW 5050
LED STRIP 1 m
552451
COLOR CONTROL
Slave Controller
+
470672
Slave
RGBW 5050
LED STRIP 1 m
552451
LIPSY 36 M
Color Control (Slave)
133748
Zone 1 consists of the COLOR CONTROL Master Controller with a connected RGBW LED Strip, a COLOR
CONTROL Slave unit with a connected RGBW LED Strip and a SLV LIPSY COLOR CONTROL slave version
luminaire. Zone 2 consists of a COLOR CONTROL COLO Slave Bulb and a COLOR CONTROL Slave unit
with a connected RGBW LED Strip. Zone 3 consists of two SLV LIPSY COLOR CONTROL slave version
luminaires.
COLOR CONTROL
RGBW ceiling luminaire with a diameter of 48,5 cm as
master unit, including a remote control.
RGBW ceiling luminaire with a diameter of 35 cm as
slave unit.
RGBW ceiling luminaire with a diameter of 48,5 cm as
slave unit.
ZONE 2
COLO Bulb
470673
(Sla ve )
COLOR CONTROL
Slave Controller
+
470672
Slave
RGBW 5050
LED STRIP 3 m
552453
ZONE 3
LIPSY 50 M
LIPSY 50 M
Color Control (Slave)
Color Control (Slave)
133758
133758