Gunnebo Industries RLP 2 Manuel De L'utilisateur page 6

• Do not ever walk or stand under the suspended load.
• Take into consideration that the load may swing or rotate.
• Watch your feet and fingers while loading/unloading.
Specific Information
• Make sure RLP can rotate 360° and articulate 180° without interfearing
with other parts.
• RLP should be tightened to torque according to the relevant table (+/-
10%). In case of turning movements the recommended torques must
be checked regularly.
• Adjust to the direction of the pull before attaching to the lifting means.
• All fittings connected to the RLP should be free moving. When
connecting and disconnecting the lifting means (wire ropes, chain
slings, round slings), pinches and impacts should be avoided. Damage
to lifting components caused by sharp corners should also be avoided.
• To prevent unintended dismounting through shock loading, rotation
or vibration, thread-locking fluid such as Loctite (depending on the
application, please refer to the manufacturer's instruction) should be
used to secure the bolt.
• Do not fit with larger hook than RLP can accomodate.
6