Gunnebo Industries RLP 2 Manuel De L'utilisateur page 4

1.
1. Constituent parts. Ensure
that the locking ring is
mounted on the bolt.
3.
3. Place the house on the
bush. The traceability
code should be seen.
5.
5. Push the bolt until clicking.
Conditions for symmetric lifts with 1, 2, 3 or 4 legs
• For three and four leg lifts, the lifting points should be arranged
symmetrically around the center of gravity in the same plane if
possible.
• Load Symmetry: The working load limit for Gunnebo Industries
lifting points is based on symmetrical loading..
• The lifting points must be positioned on the load in such a way
that movement is avoided during lifting.
2.
2. Place the D-ring on to the
bushing.
4.
4. Put the screw into the bush.
4