Turris Omnia RTROM01-FCC Guide De L'utilisateur page 16

USER MANUAL
Before starting up the device, please read this manual carefully,
particularly the router installation instructions and safety information.
CONTENTS
Router Turris Omnia
model: RTROM01-FCC
3× Wi-Fi Wall mounting
antenna
INSTALLATION
1 Connect the antennas to the connectors located on the rear panel of the router.
2 Connect your computer and the router with the Ethernet cable.
Use one of the connectors labelled LAN0 to LAN4 on the router.
3 Plug the Ethernet cable from your modem or other device supplied by your Internet
service provider into the WAN connector.
4 Plug the power cable into the router.
Important: Make sure that you are using a power adapter labelled
Turris Omnia (12V, 3,33A).
When booting up, the device gradually lights up the indicator LED's on the front
panel. This is a standard part of the start-up sequence.
5 Wait for about one minute (until the router assigns an IP address), type http://192.168.1.1
into your Internet browser and follow the instructions of the setup wizard.
The current version of the manual is always available on
https://omnia.turris.cz/user_manual.
You can find the documentation and support on https://www.turris.cz.
We will gladly answer your questions on info@turris.cz.
Power adapter,
bracket power cable
Ethernet
cable manual
EN / 16
User