Dados Técnicos - Candy PL2D40NX Notice D'emploi

INSTRUCTIONS FOR ASSEMBLY OF THE HOB
TO THE GAS SUPPLY PIPES
These instructions are for Fitters qualified for installation of equipment in line with the
relevant national standard. All work must be carried out with the electricity supply dis-
connected.
ASSEMBLY PROCEDURE
2 Spanners, sizes 17 and 23 mm are required.
GB IE
1/2 GAS
CONICAL
A) As illustrated, as- 2) Tighten the joints
semble parts in se- with the Spanners,
quence: remembering to twist
A) fixed pipe the pipes into position
B) washer before tightening.
C) Elbow fitting with
tapered thred
connection
Please note
Some models are equipped with both conical and cylindrical connectors for gas supply.
Please select the type which is correct for the supply concerned.
A B
Cylindrical
Tapered
(but connector)
thread conical
VERY IMPORTANT
For ease of installation and to avoid gas leaks, it is recommended to con-
nect the pipes as follows:
First connect the pipe to the Hob
and then
Connect the pipe to the gas supply.
In this sequence is not followed, there is a danger that gas will be trapped
in the pipe.
AFTER INSTALLATION, CHECK THE TIGHTNESS OF ALL JOINTS USING
A SOAPY SOLUTION
3) Attach fitting C to
mains gas supply us-
ing rigid copper pipe
or flexible steel pipe.
44
DADOS TÉCNICOS
Placas 60x50 A
Queimadores 4 a gás
–
Referência do modelo PL01
Alimentação (V/Hz) 230/50
Tensão (W) –
Queimador semi-rápido 1
Queimador traseiro rápido 1
Queimador pequeno 1
Queimador frontal rápido 1
Queimador duplo –
Queimador grande –
Potência de gás instalada:
- gás metano (G20/20 mbar) kW** 8,2
- gás butano (G30/28-30 mbar) g/h 597
Isqueiro electrónico* sim
Dispositivo de segurança do gás –
Dimensão do aparelho (l x p) mm. 595x510
Grau de protecção –
Classe 3
* Apenas em algunos modelos ** Parâmetros de fabrico
SR R
R P
Fig. 1b
45
A B B
4 a gás 3 a gás 3 a gás
– 1 elèctrico 1 elèctrico
PL02 PL01 PL02
230/50 230/50 230/50
– 1400 1400
1 – –
1 1 1
1 1 1
1 1 1
– – –
– – –
8,2 6,7 6,7
597 488 488
sim sim sim
sim – sim
595x510 595x510 595x510
– Tipo Y Tipo Y
3 3 3
Fig. 1
IPT cat. II
2H3 +
E R
R P