Declaration Of Conformity; Noise/Vibration Information; Mounting And Operation - SPIT 493 Notice Originale

Declaration of Conformity

We declare under our sole responsibility that the prod-
uct described under "Technical Data" is in conformity
with all relevant provisions of the directives
2011/65/EU, until 19 April 2016: 2004/108/EC, from
20 April 2016 on: 2014/30/EU, 2006/42/EC,
2000/14/EC including their amendments and com-
plies with the following standards:
EN 60745-1, EN 60745-2-6.
2000/14/EC: Guaranteed sound power level 105.
Conformity assessment procedure according to An-
nex VI.
Equipment category: 10
Notified body:
TÜV NORD CERT GmbH & Co. KG,
Am TÜV 1, 30519 Hannover
Technical file (2006/42/EC, 2000/14/EC) at:
SPIT SAS
150, Route de Lyon
26500 Bourg-lès-Valence Cedex
FRANCE
Jean-Michel DREVETON
SPIT Quality Manager
Operations Valence
SPIT SAS; 150, Route de Lyon;
26500 Bourg-lès-Valence Cedex
FRANCE
05.08.2015

Mounting and Operation

Action
Insert the SDS-max applica-
tion tool
Removing the SDS-max
application tool
Changing the chisel
position
Adjusting the auxiliary
handle
1 609 92A 1HH • 5.8.15

Noise/Vibration Information

The measured values of the machine are listed in the
table on page 75.
Sound emission values determined according to
EN 60745-2-6.
Vibration total values a
tainty K determined according to EN 60745-2-6.
The vibration level given in this information sheet has
been measured in accordance with a standardised
test given in EN 60745 and may be used to compare
one tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or insertion tools or is poorly maintained, the vi-
bration emission may differ. This may significantly in-
crease the exposure level over the total working
period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the op-
erator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm,
organisation of work patterns.
Figure Please observe
1
2
3
4
(triax vector sum) and uncer-
h
English | 11
Page
76
76
77
77