Batteries Replacement - BST UHF-2400 Manuel D'utilisation

UHF-2400
HANDHELD TRANSMITTER OPERATING
FREQUENCY SETUP
To change frequency channel, press set until LCD screen display Ch001 (channel display values) or 750.000* (frequency display values) (*
varies depends on current settings). Press the up or down buttons to select a different channel frequency (channe1 ranges from 1-98 & A-F)
Then the LCD screen will flash. Press set agaln to confirm (if you don't confirm no adjustments will be made.)
LOCK FUNCTION

BATTERIES REPLACEMENT

© Copyright LOTRONIC 2012
When you switch the mic on, the frequency , the frequency number and batteries level are displayed on
LCD display
Keep pressing set until LCD screen display "LOC SET » after 1-2 seconds screen will dlsplay LOC OFF
(unlock) or LOC ON (locked). Press up or down to switch between the two setiings. Then the LCD screen
will flash. Press set again to confirm (if you don't confirm no adjustrnents will be made )
.
Switch the mic off.
Unscrew the battery cover
Put out the two olf batteries. Then insert new batteries ( AA
1.5V ). Respect polarity. Then screw the batteries cover
WWW.BSTDJ.COM
Page 12