Description Of The Display; Lock Function - BST UHF-2400 Manuel D'utilisation

Systeme uhf double canaux
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

UHF-2400

DESCRIPTION OF THE DISPLAY

4)
Antenna I
This receiver is diversity. The receiver will automatically choose the antenna witch the best operating range. Antenna I indicator lights
on if the antenna A is selected.
5)
Antenna II
This receiver is diversity. The receiver will automatically choose the antenna witch the best operating range. Antenna II indicator lights
on if the antenna B is selected.
6)
Mute indicator
The mute indicator lights on when no wireless signal is received on the receiver. In this case, check if the transmitters are switched on
and if frequencies of receiver and transmitters are the same.
7)
Frequency number
This number is frequency number ( up to 100 frequency numbers )
RECEIVER OPERATING
FREQUENCY SETUP

LOCK FUNCTION

© Copyright LOTRONIC 2012
Press set for LCD screen displays several numbers as shown above This is the frequency current
station. to change frequency use the▲ or ▼ button to select a different channel, then the LCD
screen will flash to remind you to confim please press setagaln to confirm
Keep pressing the set button until the LCD screen displays ''LOCK''. After 2-3 seconds, screen will
display "LOC ON" or "LOC OFF" as shown above (LOC ON) means that systern is locked. If
system is locked, the lock indicator will display on the LCD screen. In this mode, no adjustrnent
can be made to the system and system can not be powered off. "LOC OFF" means system is can
be powered off. Press ▲ button to switch to "LOC ON" to lock system in current status or press
the ▼button to switch to "LOC OFF" to enable system adjustments
 
1)
RF indicator
This signal is the signal received from the transmitter.
Stronger is the signal, better is the wireless transmitting system
2)
AF indicator
This signal is the level of the sound level.
If the level is too high, the sound will be distorted.
Check if the signal level never reach 0 or Peak
3)
Frequency
This frequency is the current use frequency
 
WWW.BSTDJ.COM
Page 10 

Publicité

Table des Matières
loading

Table des Matières