Temperature Setting; Automatic Off; Temperature Control; Auto Off - Soehnle WELLNESS HEATING PAD Mode D'emploi

5. Temperature setting

EN
Use the controller to set the desired temperature. The heating
pad switches on automatically when the controller is set to a
temperature, and the corresponding LED light will light up. The
heating pad shuts off and the LED light goes out if the thermos-
tat is set to "OFF".
Attention
Please ensure that the heating pad sits loosely, i.e. some air cir-
culates between the heating pad and your skin during use.
Accumulation of heat must be prevented. Never use the heating
pad without the cover.

6. Automatic off

The electric heating pad shuts off automatically after 90 minutes
of continuous use. This saves energy and provides additional
safety, because the heating pad is never used without supervisi-
on. The LED light will blink. In order to switch the heating pad
back on, first set the controller to "OFF" and then back to the
desired temperature.
After use please disconnect the power plug from the power out-
let.
17
8001_emotion_3577-G_09-10-2014.indd 17 09.10.2014 15:31:3