tuc tuc AUPA 3.0 Manuel D'utilisation page 34

INSTRUCTIONS FOR USE
UNFOLDING INSTRUCTIONS
A. Insert the product out of the box, (please
properly handle bags) hold the seat height
adjustment button, raise the seat up.
B. Press the round button at both side to
expand the largest state and release the
button, make sure it is locked.
C. Press the round button at both side to
make sure chairs collapsed.
1. Pull out the bottom of the tray handle demolition, while installation fitting plate is aligned with the
holes on the armrest insert,inserted in the end portion, release handle, pull back to confirm that the tray
is securely in place.
2. Pull out tray at the bottom of the handle disassembled and maintained, then pull out the tray can
remove the plate.
3. Pull out the bottom of the tray handle the demolition,tray is pulled out, when you see a red dot when
the tray can be turned on.
4. Press the button to turn the tray, the tray can be turned down.
5. Chair normal use, remember not to remove the plate to avoid the child folders in hand, when the
chair is not used to remove plate hung on the rear tube plate buckle.
1-5
34