Installation Of Accessories - H.Koenig WIZ400 Mode D'emploi

Pic. 1

Installation of Accessories

1. Install the straight steam nozzle
Hold the pipe section of the straight steam nozzle in your hand, make sure the line with
hole at bottom, and click it into the steam outlet. If need to use the steam brush, put the
steam brush to the straight nozzle.
See the pic. 3 and Pic.4.
2. Install the big/small glass nozzle to the steam outlet. See the pic. 5.
Pic.3
Pic. 2
Pic.4
Pic.5