Mark Maddox MMBJK626 Manuel D'instructions page 15

ANALOG MODE
Hour hand Minute hand
Normal position
LUN 2
I
Date
Second hand
First click:
date setting
Second click:
time setting and
quick day setting
Crown
II
TIME SETTING
1. Pull out the crown to the first click.
Date
setting
2. Turn the crown clockwise until the previous
day's date appears.
3. Pull out the crown to the second click when the
second hand is at the 12 o'clock position.
4. Turn the crown clockwise and counter-cloc-
LUN 2
kwise repeatedly between 11:15 P.M. and 3:45
A.M. to select the desired day and language
I II
5. Turn the crown to set hour and minute hands.
(Check that AM/PM is set correctly)
6. Push the crown back in to normal position.
In accordance with the time signal.
Time setting
and quick day
setting
The date will change gradually between 9:00
P.M. and 4:00 A.M. Therefore, do not set the date
during this time period or the date may not change
properly. If it is necessary to set the calendar
during that time period, first change the time to
any time outside it, set the date and then reset the
correct time.
In case of bilingual day calendar, choose
the desired language. When the day shifts
automatically to the next day, the other lanugage
will appear temporarily.
3 HANDS, DATE & DAY