Geonav 4C Manuel D'emploi Et D'installation page 12

NAVIONICS Electronic Charts
Changing chart symbols
The symbols used to represent the objects on the chart (buoys,
lights, landmarks, etc.), as well as chart colors, can be se-
lected between paper-chart International or US styles.
Press PAGE to display the menu, select SETUP, then move the
cursor to the next page and select PRESENTATION (INTER. or
US).
Displaying port services
NOTE: This function is available only with the NAVIONICS cartridges containing the
Port Services feature.
This symbol identifies a port providing services.
Zoom down to 1 NM, position the
manual cursor on the icon (sail-
ing boat) relative to the selected
marina.
By pressing ENTER, a window
will list all the services available
in that port.
Select the desired icon by using
the CURSOR key.
Port services are identified by the
icons shown in the table on the
following page.
The number and the type of service available will depend on
the NAVIONICS cartridge installed.
English
20
Health and first aid
services
Tourist services and
shops
Engine, boat,
electronic and
other repairs
Displaying Tides and Currents data
Position the cursor on the icon of a Tide or Cur-
rent station, then press ENTER.
A graph will show the tide rate or the tidal stream relevant to
the station selected, as measured during the current day.
Information
Customer services
and port
authorities
Water Tide station
Fuel Current station
21
English