Bluetooth Function - LOTRONIC BOOST120VHF-BT Mode D'emploi

POWER SUPPLY: BATTERY & AC OPERATION
1. Built-in rechargeable battery and AC power. Prior to using this system for
the first time, please insert the AC lead into the AC socket of the player
and plug the other end on a suitable wall outlet. Make sure that the
"CHARGE INDICATOR" is ON 10 hours continuously.
2. Please recharge once every 6 months if you don't use the system for a
longer period of time.
NOTE: Please shut down the power switch after you have finished using the
system.
TO PLAY USB-DISK MP3/WMA MUSIC
1. Switch power source to ON.
2. Insert a USB-DISK
3. Select a title and press►
TO PLAY LINE IN MUSIC
1. Insert an RCA plug into the LINE IN socket and press USB/AUX.
2. Insert a microphone TRS Jack into MIC1 or MIC2 and switch the VHF on.
3. Adjust the MIC VOL, ECHO, MASTER VOL.
TO RECORD A MUSIC
1. To start record function, press the RECORD button.
2. Adjust level of the audio input you want to use
3. To stop record, press the RECORD button again.
TO USE VOX FUNCTION
When VOX function is enabled, the music level will decrease when somebody
talks into one of the microphones. The music level becomes normal when the
user stops talking into the microphone.
To activate this function, switch the VCV switch to on. If you want to disable
this function, set this switch to off position

BLUETOOTH FUNCTION

1. Switch on the Bluetooth function via power switch (24). The power LED
(23) will light up
©Copyright LOTRONIC 2014 7