Using The Timer - Buffalo DB170 Mode D'emploi

UK
Operation
Cooking
1. Close the plates.
Note: It may be necessary to slightly grease the plates with cooking oil before cooking
•
depending on the foodstuff.
2. Set the thermostat to the desired temperature (100°C-300°C) and turn the appliance On. The power
indicator light turns on.
• Note: 185°C is suitable for general waffle cooking.
3. The power indicator light turns Off when the appliance has reached the set temperature.
4. Lift the top plate and place the waffle mix on the bottom plate.
5. Lower the top plate.

Using the timer

The digital timer with audible alarm can be set from 1 second to 15 minutes. The timer provides an
audible alarm after the set time expires. It provides no electrical control over the unit.
• START/STOP: Press START/STOP to start timer, press again
to stop. The timer will provide an audible alarm after the
set time. The alarm will beep 10 times and the display will
continue to flash until timer is reset (press the START/STOP
button).
UP: Press UP to add extra time.
•
• DOWN: Press DOWN to reduce time.
• PROGRAM: There are a total of 6 programmable timer settings. The default factory program settings
are given below.
Program
Factory preset time
• To change the length of a program select the program you want to change by scrolling using the
PROGRAM button.
• Adjust the program time by using the UP and DOWN buttons. Press START/STOP to commence the
count-down. The new program time will be automatically stored.
• If the unit is left without power for more than 24hrs the timer settings will revert to the factory
defaults.
4
DB170_ML_A5_v3 20210820.indb 4 DB170_ML_A5_v3 20210820.indb 4
1 2 3 4
00:30 01:00 01:30 02:00 02:30 03:00
5 6
2021/8/20 16:24 2021/8/20 16:24