Caution For Ac Mains Lead - Panasonic EY47A1 Instructions D'utilisation

ONLY FOR U. K.
EN
XI. CAUTION FOR
AC MAINS LEAD
FOR YOUR SAFETY PLEASE READ THE
FOLLOWING TEXT CAREFULLY
This appliance is supplied with a mould-
ed three pin mains plug for your safety
and convenience. A 5 amp fuse is fitted
in this plug.
Should the fuse need to be replaced
please ensure that the replacement fuse
has a rating of 5 amp and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark
mark on the body of the fuse.
If the plug contains a removable fuse
cover you must ensure that it is refitted
when the fuse is replaced.
If you lose the fuse cover the plug must
not be used until a replacement cover is
obtained.
A replacement fuse cover can be
purchased from your local Panasonic
Dealer.
CAUTION:
IF THE FITTED MOULDED PLUG IS
UNSUITABLE FOR THE SOCKET
OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND
THE PLUG CUT OFF AND DISPOSED
OF SAFELY. THERE IS A DANGER OF
SEVERE ELECTRICAL SHOCK IF THE
CUT OFF PLUG IS INSERTED INTO
ANY 13 AMP SOCKET.
How to replace the fuse
The location of the fuse differs according
to the type of AC mains plug (figures A
and B).
Confirm the AC mains plug fitted and
follow the instructions below. Illustrations
may differ from actual AC mains plug.
Open the fuse cover with a screwdriver
and replace the fuse and close or attach
the fuse cover.
or the BSI
– 24 –
Figure A
Figure B
Fuse Cover