Briteq DB-150 Mode D'emploi page 5

ENGLISH
MENU STRUCTURE...
MAIN MENU:
This menu is used to select one of the 4 sub menus.
 Press the MENU button together with the UP/DOWN buttons to browse the menu.
 Press the ENTER button to select the desired submenu.
ADDRESS SUBMENU:
This menu is used to set the DMX address of the 4 output channels. Each channel can be set to a unique
DMX-address. You can even give 2 or more channels the same DMX address.
 Press the ENTER button to browse through the submenu.
 Once you selected the desired channel, press the UP/DOWN buttons to set the address
 Press the MENU button to return to the main menu.
MODE SUBMENU:
This menu is used to set the working mode of the 4 output channels.
 DIM mode: use this mode when you connect lamps (projectors) to this output channel. You will be able to
dim the output smoothly between 0% and 100%.
 SWITCH mode: use this mode when you connect small light effects to this output channel. You can toggle
the output between ON (100% output) and OFF (0% output). Now you can switch small light effects on/off
with your DMX-controller.
 Press the ENTER button to browse through the menu.
 Once you selected the desired channel, press the UP/DOWN buttons to set the working mode.
 Press the MENU button to return to the main menu.
ALONE SUBMENU:
This is the standalone mode; all output levels can be set directly on the control panel so you don't need a
controller. It's important to know that the output settings are preserved when the unit is disconnected from
the mains. This makes the DB-150 very useful to illuminate exhibition booths etc.
 Press the ENTER button to browse through the menu.
BRITEQ
®
OPERATION MANUAL
5/31
ENGLISH
 Once you selected the desired channel, press the UP/DOWN buttons to set the output level.
 Press the MENU button to return to the main menu.
CURVE SUBMENU:
This menu is used to choose one of the 3 preprogrammed dimming curves. Please check the diagram with
the dimming curves to see which curve suits most for your needs. Of course you can also simply try the
dimmer curves... .
SPECIFICATIONS
Power Input:
Power outputs:
Channel Fuses:
Input fuse:
DMX input:
DMX output:
Size:
Weight:
You can download the latest version of this user manual on our website: www.beglec.com
DB-150 BRITEQ
230Vac / 20A maximum (4600Watts)
4x 230Vac / 2000Watts
250V/8A (size 20x5mm)
20A "auto reset" thermal circuit breaker
3pin XLR male
3pin XLR female
150 x 9 x 7 cm
5,0 kg
Every information is subject to change without prior notice
6/31
®
OPERATION MANUAL
DB-150