Specifications; Standby Power - Sharp IG-A20E Mode D'emploi

SPECIFICATIONS

Model
Power supply
Fan speed
Power consumption (W)
Operating noise level (dBA)
Airfl ow volume (m
Applicable fl oor surface area (m
Ion density (ions/cm
Power cord (m)
Outer dimensions (mm)
Weight (kg)
*1 The target fl oor surface area for which an emitted airborne ion density of about 25,000
ions/cm can be measured at a point near the center of the room (at a height of about 1.2m
3
from the fl oor), during operation at the HIGH mode when the main unit is placed near a
wall.
*2 Ions, counted per cm
1.2m from the floor) during operation at each airstream setting when the main unit is
placed near the wall.
•
The number of ions will vary according to the room conditions and operation mode.

Standby Power

In order to operate the electrical circuits while the power plug is inserted in the wall
outlet, this product consumes about 0.8W of standby power.
For energy conservation, unplug the power cord when the unit is not in use.
IG-A20E
HIGH MED.
22
45
468 390
/hour)
3
) *
1
2
25,000 12,000
) *
3
2
594(W) 480(H) 230(D)
10.5
, blown into air near the center of the room (at a height of approx.
3
220-240V, 50/60Hz
LOW HIGH
14 9
40
34
840
306
23
7,000 25,000
2.0
940(W) 480(H) 230(D)
E-11
IG-A40E
MED. LOW
39 10
20
47
40 34
648 510
50
12,000 7,000
15.0