Operation; Related Products - HITEC ePowerBox 17A Mode D'emploi

6. Operation

To use the power supply after you connect the device to
it, turn it on with the power switch on the side. The LEDs
indicate output power from minimum to maximum in
2 amp increments.
In the event of a charger malfunction, such as
overheating or short circuit, all LEDs will shut off.
Correct the problems and restart the power supply.

7. Related Products

X1 Pro
Input Voltage Range:
Charge Circuit Power:
Discharge Circuit Power:
Charge Current Range:
Discharge Current Range:
LiPo, LiFe & LiIon
Balancing Current Drain:
LiPo, LiFe & LiIon
Cell Count:
Maximum NiCd/NiMH
Cell Count:
Lead Acid (Pb)
Cells/ Voltage:
Dimensions (WxDxH):
Weight:
11~18 Volts DC
180 Watts
30 Watts
0.1-16.0 Amps
0.1-8.0 Amps
200 mA per cell
1-6 Cells
1-15 Cells
2-20 Volts
3.6 x 4.4 x 2.0 in.
14.3 Ounces
X1 Pro
13