Control Panel Functions I Operation - THERMOBILE COOLMOBILE 21 Manuel De L'utilisateur

English
Control panel functions
1. Power : Use to power On I Off.
2. ▼ ▲: Raises or lowers temperature and/or sleep (off)
time
3. Cool : Use to select cooling mode.
4. Low Mode : Controls fan low speed.
5. High Mode : Controls fan high speed.
6. Off Timer : To set the length of time, once
turned on, that you wish the airconditioner
to run for. You can set 0-24 hours. Time
intervals are 30mins. up to 10 hours and
then 1 hour between 10 and 24 hours.
7. Remote : From the long distance, you can control the
machine by wired remote control.
8. Room : If the LED is On, the displayed temperature is
for Room temp. If the LED is Off, the displayed
temperature is for spot temp.
Operation
running & stop
16
9. Comp. : When the compressor is operating, the LED
10. Error : Error signal ( E1 : High Pressure, E2 :
11. Water Full : Red light indicates 'Tank Full'. The
12. Align Drain Tank : The red light indicates the water
13. Display : Display Room/Spot temperature, and the
56.001.599 - rev. 03 - 2020
THERMOBILE
is On.
Low Pressure, E3 : Sensor, AF: Eva Freezing)
compressor will shut off automatically.
Empty tank and replace in position to
resume operation.
tank is not in the correct position.
setting temp and sleep time in case of
setting them. When the user set the sleep
timer, 'hr' will be turned on.
(Display of 'LO': under the 0ºC, Display of
'HI': over the 50ºC).
1. START BY PRESSING THE 'POWER'
BUTTON.
· Airconditioner will start up automatically.
· To STOP the unit, press the 'POWER'
button once again.
2. To change fan speed, press the 'Low'
button.
3. If you wish to operate on fan only, press the
'COOL' button. To resume cooling, press
the 'COOL' button again.
(Note : There is a 3 minute delay
when switching functions to protect
the compressor)
Coolmobile 21-25