Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
Installation
►
First of all align the safety light curtains / light grids and any mirrors without the
laser adjustment aid.
►
Insert the supplied batteries into the unit. → 5.1 Insert batteries
►
Attach the laser adjustment aid onto the transmitter (→ Figure 1). Ensure the
correct position.
►
Make sure that there are no people in the range of the laser beams.
►
Switch on the laser adjustment aid (→ Figure 2).
►
Adjust the transmitter, receiver and any mirrors until the laser beam on the
receiver is in the same position as on the transmitter.
►
For exact adjustment the process has to be repeated for the top, the middle
and the bottom of the safety light curtain / safety light grid.
Figure 1
1: Exit laser light
4
Figure 2
1: On/off switch
Publicité
Table des Matières
