Technical Data; Introduction; Safety Regulations - Rodia 675TS Traduction Des Instructions De Service D'origine

GB

1. TECHNICAL DATA

Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 675 TS
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 kW
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 V~
Saw spindle speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.400 RPM
Blade diameter/hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ø675/30 mm
Saw height max. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mm
Sawing length max. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 mm
Machine dimensions (L x W X H) . . . . . . . . . . . . . . . . . . . .1.514 x 720 x 1.620 mm
Machine dimensions w. folded legs (L x W X H) . . . . . . . . . .1.514 x 720 x 1.050 mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 kg
Noise level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 dB (A)
Noise level during sawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 dB (A)

2. INTRODUCTION

This sawing machine is designed and
intended for the professional contractor
Through continuous supply of cooling
water the cutting quality is improved and
the wear on the saw blade is minimized.
The cooling water also absorbs the saw
dust .
The quality and construction of this sawing
machine meet the highest standards . The
design is based on longevity and minimal
maintenance .

3. SAFETY REGULATIONS

1 The sawing machine is only to be used
for sawing sandstone, concrete prod-
ucts and natural stone .
2 Only saw blades advised by the manu-
facturer should be used .
3 Check the following before starting
sawing:
• the machine should be positioned on a
stable, flat and horizontal base,
• the saw blade must be correctly
mounted, (direction of rotation and
centred correctly)
675TS
RODIA ®
• the condition of the saw blade,
• correct fixing of the saw cover,
• sufficient supply of clean cooling
water .
4 During sawing the material to be cut
should not be tilted or moved .
5 During sawing with this sawing
machine the max. sound pressure level
is exceeded.
6 The safety label on the machine should
never be removed .
7 Besides the above-mentioned safety
regulations the user should pay atten-
tion to the following items:
• Read the instructions for setting up and
using the machine carefully .
• Check that the power cord is correctly
connected to the power supply .
• Electrical cables may not come in con-
14
Because the max. sound pressure
level is exceeded during opera-
tion wearing hearing protection
is mandatory.
Sawing of calcium silicate will
expose quartz dust. For your
safety wear respiritor equipment.