THE USE
Note: the electric blanket is only to be used as under blanket. Not recommended for fold‐away bed
systems. The blanket cannot be used on a water bed.
•
Spread the electric blanket evenly over your mattress, and allow enough space for your pillow,
as shown below.
•
Roll out the fastening strips.
•
Pull the middle fastening strip under the middle of the mattress and fasten it to the loop on
the other side of the blanket, see figure 1.
•
Attach the fastening strips to the corners of the mattress, as shown in figure 2.
•
The electric blanket must be firmly attached as in figure 3, to ensure it does not move.
14