HQ MAG-LAMP3 Mode D'emploi page 2

This magnifier desk lamp is made for indoor use only and not for wet or high humidity
conditions. The housing is made from strong plastic material and the tension of the arm
can be adjusted with the included Allen wrench (stored at the bottom side). The lens
shutter should be closed to avoid that the lens works like a burning glass creating fire
when the sun shines through.
Please pay attention that the lamp is disconnected from the mains voltage when the bulb
must be replaced. Replace the lamp by unscrewing the four screws at the lower lamp
cover.
Lamp specifications:
• Diopter:
• Lens size:
• Lens material:
• Light source:
• Tube:
• Housing:
• Power:
Declaration of conformity
We,
Nedis B.V., De Tweeling 28, 5215MC 's-Hertogenbosch, The Netherlands
Tel.: 0031 73 599 1055, Email: info@nedis.com
Declare that product:
Brand: HQ
Model: MAG-LAMP3B, MAG-LAMP3W
Description: Magnifier desk lamp
Is in conformity with the following standards
EMC: 2004/108/EC
LVD: 2006/95/EC
And complies with the requirements of the European Union Directives.
's-Hertogenbosch, 18.11.2008
Mrs. J. Gilad
Purchase Director
ENGLISH
3+12 Diopter
10 cm
Glass
12 W circular fluorescent lamp
T4 12W 6400K (Day light) circular
Plastic
220 V – 240 V
2