Publicité
Virtual Training Compatibility Matrix
BLE Products
Control System
PowerBeam Pro BLE
Controlled Resistance
PowerTap BLE
Power to Speed
Speed Sensor BLE
Speed to Power
PowerCal BLE
Power to Speed
Processor 1.6 GHz, Random-access memory 1GB MB RAM, any graphics card, minimal resolution 1024×768, Hard-disc space minimum 200 MB HDD,
Minimum System
Other DVD-ROM, Operating system Windows XP SP3, Windows Vista, Windows 7, Windows 8, Internet connection
Requirements
Processor Core 2 Duo – 2 GHz, Random-access memory 2 GB RAM, resolution 1600×1200, Hard-disc space minimum 20 GB HDD, Other DVD-ROM,
Recommended
Operating system Windows 7 or Windows 8, Internet connection.
System
Configuration
1
1.1: To open up your trainer, press the button and extend the legs as shown,
then set the trainer on a flat surface.
1.2: If the floor is not level, use the yellow dial on the left leg to adjust as
necessary.
1.1: Para montar el aparato de entrenamiento, extienda las patas tal como se indica
a continuación y colóquelo sobre una superficie plana.
1.2: Gire la ruedecilla para ajustar la pata y nivelar el bastidor como se muestra a
continuación.
Platforms
Windows desktop
Tablet iPad
Tablet and Mobile Android
Minimum and recommended computer configuration for Desktop version
1.1
1.2
(go to www.virtualtraining.cycleops.com)
OS Version
Windows 8 only
iOS 5.1+
Android 4+, min.
resolution 1024 x 600
1.1: Pour monter votre appareil, étendez ses pieds comme illustré ci-dessous,
puis posez-le sur une surface plane.
1.2: Tournez la molette pour régler le pied et mettre le cadre de niveau, comme
illustré ci-dessous.
1.1: Zuerst stellen Sie die Beine, wie unten dargestellt, aus. Dann stellen Sie
den Trainer auf eine ebene Fläche.
1.2: Drehen Sie das Stellrad, wie unten dargestellt, um das Bein anzupassen
und den Rahmen auszurichten.
1.1: Per impostare il rullo, estendere le gambe come mostrato qui sotto,
quindi collocare il rullo su una superficie piana.
1.2: Ruotare la rotella per regolare la gamba e stabilizzare il telaio come
mostrato qui sotto.
1.1: Om uw trainingstoestel te monteren, spreidt u eerst de benen van het
toestel, zoals hieronder afgebeeld. Vervolgens plaatst u het trainingstoestel op
een effen oppervlak.
1.2: Draai aan het duimwieltje om de benen aan te passen en het frame gelijk
te stellen, zoals hieronder afgebeeld.
1.1: トレーナーを組み立てるには、 下図のように脚を拡げて、 平らな
面に立てます。
1.2: 下図のようにサムホイールを回して脚の高さを調節し、 フレーム
を平らにします。
What I need?
BlueTooth 4.0 (external or internal)
iPad, iPad 2 No BlueTooth 4.0
iPad 3
BlueTooth 4.0 integrated
iPad 4
BlueTooth 4.0 integrated
Tablet or mobile has to support
Bluetooth 4.0
3
Publicité
