Milwaukee PROPEX M12 FUEL Manuel De L'utilisateur page 3

• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
EXPANSION TOOL
• This product is designed to expand PEX-a ma-
terial. Other materials may split or crack, causing
leaking.
NOTE: It is the responsibility of the installing
contractor to determine the compatibility of
the tool and fitting system used for the con-
nection. Fittings should be installed per the
manufacturer's instructions. Contact the fitting
manufacturer for specific information on their
system.
•Store tool with expander head installed to protect
expander cone from damage.
• Keep fingers away from expander head during
use. When expander head contracts, pinching can
occur.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
UL Listing for Canada and U.S.
US
C
SPECIFICATIONS
Cat. No. ..................................................... 2532-20
Volts.............................................................. 12 DC
Battery Type .................................................M12™
Charger Type................................................M12™
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Max PEX-A Diameter..................................3/8" - 1"
Expander Heads .........................................3/8" - 1"
MILWAUKEE M12™ ProPEX
3/8" .....................................Cat. No. 49-16-2413
1/2" .....................................Cat. No. 49-16-2414
5/8" .....................................Cat. No. 49-16-2415
3/4" .....................................Cat. No. 49-16-2416
1" ........................................Cat. No. 49-16-2418
Lubricant ............................Expander Cone Grease
FUNCTIONAL DESCRIPTION
6
2
1. Expander cone
1
2. Trigger
3. Trigger lock
4. LED
5. Fuel gauge
6. Belt hook
7. Expander head
ASSEMBLY
Recharge only with the charger
WARNING
specified for the battery. For spe-
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
3
or Uponor Standard
®
Cat. No. 49-08-2400
5
4
3
7